Pressure resisting machine
View more
English
-
简体中文 -
English
-
Русский язык
-
عربي
-
Polski
-
Português
-
Español
PREV
NEXT
News products
PREV
NEXT
Off-line punching and cutting machine
1. Use:
1.1 For off-line automatic drilling of rubber extruders.
Second, equipment operation requirements:
2.1 Automation level: semi-automated,
2.11 Manual feed automatic cutting automatic punching (double end cutting, one end length position adjustable), adding optical fiber induction error prevention at both ends;
2.12 Platform quick change, common platform only replace the copying tooling, platform sharing;
2.13 Tool part is not exposed, can be quickly disassembled and easy to replace;
2.14 Up and down, the front and back shifting die part adopts servo drive, and each position can be manually written and displayed separately;
2.15 The cavity part should be smooth, easy to wear the product, the tooling part is a mold with four holes, the Y-axis direction is moved and the product tooling is distributed;
2.16 The position of the hole can be adjusted, which can be quickly positioned;
2.17 The equipment beat is less than 20s, and the four product processing beats are determined by the human operating speed;
2.18 The longest effective length of the equipment is 4400mm, the shortest processing size is 3500mm, and the replacement tooling within the size range can be processed (any length can be adjusted);
2.19 No exposed tool, no safety risks;
2.20 The device should be equipped with 15 air batch heads, and the maximum spacing between small holes is 50mm.
Third, equipment functional requirements:
3.1 Material requirements:
3.1.1 Equipment frame structure Q235 material;
3.1.2 The equipment needs to add safety grating;
3.1.3 Hardness of tool material SKD11 after heat treatment HRC58-62
3.1.4 Device color: RAL7035;
3.1.5 High-performance Mitsubishi programmable control system of foreign brands; PLC is FX3U series, equipped with Ethernet communication (or FX5U series comes with Ethernet), more than 10 inches of Mitsubishi or Kunlun on-state touch screen
3.1.6 Brand of pneumatic components: SMC/ ADEke;
3.1.7 Electrical parts brand: Schneider;
3.1.8 Tooling sheet material is aluminum profile.
- Parameters
1. Use:
1.1 For off-line automatic drilling of rubber extruders.
Second, equipment operation requirements:
2.1 Automation level: semi-automated,
2.11 Manual feed automatic cutting automatic punching (double end cutting, one end length position adjustable), adding optical fiber induction error prevention at both ends;
2.12 Platform quick change, common platform only replace the copying tooling, platform sharing;
2.13 Tool part is not exposed, can be quickly disassembled and easy to replace;
2.14 Up and down, the front and back shifting die part adopts servo drive, and each position can be manually written and displayed separately;
2.15 The cavity part should be smooth, easy to wear the product, the tooling part is a mold with four holes, the Y-axis direction is moved and the product tooling is distributed;
2.16 The position of the hole can be adjusted, which can be quickly positioned;
2.17 The equipment beat is less than 20s, and the four product processing beats are determined by the human operating speed;
2.18 The longest effective length of the equipment is 4400mm, the shortest processing size is 3500mm, and the replacement tooling within the size range can be processed (any length can be adjusted);
2.19 No exposed tool, no safety risks;
2.20 The device should be equipped with 15 air batch heads, and the maximum spacing between small holes is 50mm.
Third, equipment functional requirements:
3.1 Material requirements:
3.1.1 Equipment frame structure Q235 material;
3.1.2 The equipment needs to add safety grating;
3.1.3 Hardness of tool material SKD11 after heat treatment HRC58-62
3.1.4 Device color: RAL7035;
3.1.5 High-performance Mitsubishi programmable control system of foreign brands; PLC is FX3U series, equipped with Ethernet communication (or FX5U series comes with Ethernet), more than 10 inches of Mitsubishi or Kunlun on-state touch screen
3.1.6 Brand of pneumatic components: SMC/ ADEke;
3.1.7 Electrical parts brand: Schneider;
3.1.8 Tooling sheet material is aluminum profile.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
INQUIRY
Add Successfully
Send Inquiry
Machinecx will continue to focus and innovate to provide more rubber and plastic equipment to more customers and create greater value.
CONTACT US
Add: No. 1, Huangchang Village, Suburban Street, Conghua District, Guangzhou
Tel: +86-020-87812801 + 86-020-87821265
Email: cbh_cxjx@163.com
PREV
NEXT
Send Inquiry
CONTACT US
Add: No. 1, Huangchang Village, Suburban Street, Conghua District, Guangzhou
Tel: +86-020-87812801 + 86-020-87821265
Email: cbh_cxjx@163.com
PREV
NEXT
Machinecx will continue to focus and innovate to provide more rubber and plastic equipment to more customers and create greater value.
Address: Chengxiang Company, Building 12, No. 188, Chuanghua Road, Innovation Valley Industrial Park, Mingzhu Zhongda, Conghua District, Guangzhou City, Guangdong Province, China
Jason Dong
Tel：+86 13360043830
Email：sales@machinecx.com
PREV
NEXT
Company profile
Corporate culture
Factory floor
Water pipeline
High pressure line
Gum thread
China Six oil pipeline
TPV extrusion line
Seal line
Water pipeline
High pressure line
Gum thread
China Six oil pipeline
TPV extrusion line
Seal line
Company news
Industry news
Address: Chengxiang Company, Building 12, No. 188, Chuanghua Road, Innovation Valley Industrial Park, Mingzhu Zhongda, Conghua District, Guangzhou City, Guangdong Province, China
Amy
Tel: 13923812095
Email：machinecx_amy@163.com
Copyright ©2026 MACHINECX All rights reserved. | Powered by WKX
Copyright © 2024 Guangzhou Chengxiang Machinery Co., Ltd. Technical support: v network platform
